A state of the art wireless access control system capable of supporting up to 64 doors. It maximizes spread spectrum technology at 902-928 Mhz to ensure long range and reliable communications. The wireless controllers can be up to 300 feet away from the central access hub, which connects to a personal computer using RS-232 or Ethernet.
The nHub is the wireless gateway that communicates between the PC and the remote devices. It maintains a full database and access history from remote devices. It does not require the PC to be up and running all the time. The Hub is managed by our nSecure software that works on Microsoft XP and Vista (both Home and Ultimate versions). It is based on client/server architecture and .Net code. Some of the major features include email notification, cardholder display, global lock and unlock and much more.
The nPort-R1 is a single door access controller that supports (1) Wiegand card reader, (1) Door Status Contact for door held open and door forced open alarms, (1) Form "C" Relay to control an electric strike or magnetic lock, (1) Tamper Switch input, and (1) Override Input that manually locks the door from the inside in an emergency situation. The Portal is provided in an indoor enclosure with an externally mounted antenna for maximum range.
The nPort-I/O is a four (4) point input and four (4) point output controller. Each outout is a Form "C" Relay. Through the software, each input can be configured for normally open or normally closed detection. The nPort I/O is also provided in an internal enclosure with an externally mounted antenna for maximum range.
The nLock is a self contained single door controller which fits on a standard commercial door that is 1 and 3/4 inch thick , and a backset of 2 and 3/4 inches. Each lock can be ordered in various finishes including Brushed Aluminum, Brass, and Chrome. Each lock comes standard with a 26 Bit internal proximity reading sensor which supports HID, AWID, and Farpointe access credentials. For additional security measures, the unit can be provided with a durable keypad. The locks are powered from only (4) AA alkaline batteries which lasts approximately one year depending on usage. Installation is extremely easy as it fits in standard ANSI prep doors. No additional holes are required.
If you want high security with reduced installation costs, give us a call at (805) 501-2953 to discuss your application.
Typically an access controller can handle a maximum of two Wiegand card readers. If you want three or four card readers you need to install a second expensive controller. BUT NOW, with the DRI you can double the capacity of the controller's port. So if a controller's maximum was two card readers, you can now have four. Each DRI adds one additional port for you to use. A simple device that allows expansion at a fraction of price.
This set of boards allow you to wire and control two separate devices over a single pair of wires. This is a very useful tool when there is already wire in a conduit and you need one more pair to control an additional device, such as a gate operator, light, camera, exit request. For only $100 it makes sense to put a couple on the truck cause this will save the hassle and expense the next time. 